Msd 5096 DynaForce Starter, GM LS1-LS7 Engines Install User Manual download pdf

1. Make sure the starter mounting ﬂange on the engine block is clean and smooth.

2. Install the starter with the supplied hardware. It is recommended to leave the shims out until pinion

gear to ring gear teeth is checked. Torque the bolts to 32 lb-ft.

Note: The supplied bolts must be used for proper installation.

3. Check that the position of the solenoid is away from direct heat sources and other components. If there

are clearance problems, the starter housing can be rotated to move the location of the solenoid. This is

done by removing the three bolts on the mounting block and repositioning the starter motor (Figure 1).

MSD DynaForce Starter

Chevrolet LS Series

PN 5096

WARNING: Before installing the DynaForce Starter disconnect the battery cables. When discon-

necting the battery cables, always remove the Negative (-) cable ﬁrst and install it last.

IMPORTANT: Proper installation of the DynaForce Starter is important to the overall operation. Correct align-

ment of the starter pinion with the ring gear is needed to achieve the best operation and longev-

ity from your starter. Please read the instructions before attempting the installation.

Figure 1 Clocking the Starter for Clearance.

CLOCKING

LOCATIONS

M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4

ONLINE PRODUCT REGISTRATION: Register your MSD product online and you’ll be entered in our

monthly 8.5mm Super Conductor Spark Plug Wire give-away! Registering your product will help if there

is ever a warranty issue with your product and helps the MSD R&D team create new products that you

ask for! Go to www.msdperformance.com/registration.

Parts Included:

1 - Starter

2 - Mounting Bolts

1 - Shim Kit

1 2 3 4

1. Make sure the starter mounting ﬂange on the engine block is clean and smooth. 2. Install the starter with the supplied hardware. It is recommended

2 INSTALLATION INSTRUCTIONSM S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7

INSTALLATION INSTRUCTIONS 3M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7

Page 4

TECH NOTES_________________________________________________________________________________________________________________________ _________________

No comments

Msd 5096 DynaForce Starter, GM LS1-LS7 Engines Install User Manual