Msd 8228 Dodge Late Model Coil, 2 Pin Installation User Manual download pdf

Figure 1 The MSD Blaster Dogde Coil.

IMPORTANT: Read instructions before attempting the installation.

Parts Included:

1 - Blaster Dodge Coil

WARNING: During installation, disconnect the battery cables. When disconnecting the battery,

always remove the Negative cable ﬁrst and install it last.

The MSD Blaster Dodge Coil is designed as a replacement coil and produces a high voltage

spark. To get even more ignition performance, install an MSD Ignition Control. To ease the wiring

with an MSD Ignition, use the Universal Harness, PN 8873.

1. Disconnect the stock coil connector and the spark plug wire.

2. Remove the two mounting bolts and remove coil.

3. Install the new MSD Dodge Coil.

4. Plug in the wiring harness and connect the coil wire.

WARNING: High Voltage is present on the coil terminals. DO NOT touch the coil terminals or

tower when the engine is cranking or running.

PN 8228

M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4

ONLINE PRODUCT REGISTRATION: Register your MSD product online and you’ll be entered

in our monthly 8.5mm Super Conductor Spark Plug Wire give-away! Registering your product

will help if there is ever a warranty issue with your product and helps the MSD R&D team create

new products that you ask for! Go to www.msdperformance.com/registration.

MSD Blaster Dodge Coil

PN 8228

1 2

Figure 1 The MSD Blaster Dogde Coil. IMPORTANT: Read instructions before attempting the installation. Parts Included: 1 - Blaster Dodge Coil WARN

Figure 2 Installation with an MSD 6 Series Ignition.Limited Warranty MSD warrants this product to be free from defects in material and workmanship un

No comments

Msd 8228 Dodge Late Model Coil, 2 Pin Installation User Manual